HORIZONTAL WASHING MACHINES
DESCRIPTION
Washing machine composed of a 1.5 m input and output module. The glass is transported via a system of cut-proof rollers connected to each other by stainless steel chains and self-adjusting brass supports.
Washing machine body in stainless steel and powder coated.
Corrosion-resistant components in contact with water.
Machine equipped with 6 brushes with stainless steel shafts and aluminum supports.
Water management group composed of a washing area with tank, pump, filters and internal parts in stainless steel.
Thanks to the shape of the tank, water consumption is reduced to the bare minimum, reusing waste water from one sector to another.
Possibility of connecting the last rinsing area directly to the demineralizer.
Thermostat-controlled heating system as standard on the entire range.
Drying served by a fan mounted in an insulated box to reduce noise, connected to a distributor designed not to vary the air flow to the 4 blowers of the machine.
Adjustable working speed controlled exclusively by electronic systems to maintain constant torque even with different glass sizes.
Machine set up as standard for connection to other work modules.
ALWAYS CONNECTED
All automatic lines can be connected to our monitoring centre simply by connecting the line to the internet with the following advantages:
-
Possibility of remote troubleshooting;
-
Reduction of machine downtime;
-
Instant control of the aging of electronic components;
-
Possibility of excluding sensors to be able to continue production while waiting for a spare part (provided it doesn’t compromise the operator's safety).
TECHNICAL SPECIFICATIONS
Power supply
400 Vac Three Phase + Neutral 50 Hz
Total power absorbed
10 Kw 400 Vac 50 Hz
Fan motor
1 x 7.5 Kw 400 Vac Three-phase 50 Hz
Washing areas
1 with recycling pump and filter
Rinsing areas
1 with demineralizer connection
Washing brushes
6 standard 50 mm
(optional LOW-E)
Drying area blowers
2 upper and 2 lower
Glass minimally washable
100 x 100 mm
Washable thicknesses
From 2 to 10 mm. Self-adjustable
Working speed
2 to 5 meters per minute
Height
1360 mm approx.
Length
3000 mm approx.
Length
1600 mm approx.
Weight
1100 kg approx.
We recommend water supplied to the washing machine has the following characteristics:
Conductivity = less than 10 uS (microsiemens)
Hardness total = less than 5° F (French degrees)
Salt content = less than 5 mg/L
Chloride = less than 5 mg/L
Iron = less than 0,05 ppm
Torbidity = less than 0,5 ft
NB: The results of the window washing may be compromised if the water values are higher than the above recommended amounts. Upon request we can provide equipment for cleaning the water.
FEATURES
CONTROLLED TRANSPORT
The system adopted allows the glass to be kept adherent to the moving rollers at all times. All this thanks to an innovative and inverter-controlled type of transport.
EASY MAINTENANCE
Thanks to the type of sector construction, maintenance and cleaning are comfortable, easy and quick.
NOISE REDUCTION
Drying is served by a fan mounted in an insulated box to reduce noise with a damper to manage the air flow and therefore allows greater energy savings during processing stops. The cleanliness of the air is guaranteed by a removable filter.
SELF-ADJUSTING OPENING
The transport system adapts to the thickness of the glass via specially designed supports to reduce pressure on the glass.
LONG-LASTING BRUSHES
The washing area is equipped with 6 completely independent brushes. The shape of the bristles and the constant distribution of water guarantee long life.
TOUCH SCREEN CONTROLS
Simple and intuitive, it is the control panel which, with the EASY TOUCH formula, allows the operator to manage the entire line and control all the machine parameters. Thanks to this system the machine can be connected to our headquarters for maintenance and any machine downtime resolutions.
OPTIONALS
LOW-E BRUSHES
This type of brushes with particular bristles allows you to work with more delicate glass. The brushes are entire components including a stainless steel shaft.
WATER HEATING
The heating system is made up of a powerful resistance (4.5 kW 400 Vac Three Phase) controlled by an adjustable thermostat.
MACHINE OPENING 12-24
The machine can process glass up to 24 mm thick thanks to the inclusion of a pneumatic system that manages thicknesses from 2 to 12 mm and from 12 to 24 mm.
OPENING FOR MAINTENANCE
The movement system via ball screws allows the machine to handle thicknesses of up to 24 mm or more and open up to 400 mm for maintenance.